H2S Removal – Problem and Solutions
Hydrogen Sulphide also known as H2S is a colourless gas that produces a foul smelling odour similar to rotten eggs,
It is extremely poisonous, corrosive and flammable.
Hydrogen Sulphide results from the microbial breakdown of organic matter this can include human and animal waste, sludge storage tanks, sewers and associated pipelines.
H2S is heavier than air and can often fill a building from the ground up. The mixture of H2S air is explosive and burns with a blue flame.
Consequences of Corrosion
Hydrogen Sulphide forms acidic gases that are very corrosive to most metals. Copper is particularly susceptible to attack resulting in damage to costly electronics and electrical components.
Hydrogen Sulphide, when combined with water vapour, leads to the creation of Sulphuric Acid that attacks concrete in sewer lines causing severe degradation that can lead to sewer collapse and rapid system failure.
Symptoms of H2S Poisoning
H2S irritates the mucous membranes of the body of the respiratory tract, following short term exposure to low PPM levels ( 100 or less ) symptoms may include:
- Eye Irritation
- Skin Irritation
At Higher concentrations ( 100 – 500 PPM ) serious damage to the central nervous system can occur as well as paralysation to the olfactory nerve and loss of breathing.
Concentrations higher than 500 PPM can cause a loss of
- blood pressure
- brain and heart damage
Eliminate Odour Complaints
When the foul odour of Hydrogen Sulphide is present, local residents and businesses start calling. The MPOX range of products will allow you to eliminate the foul smell, the calls and the complaints.
You will become the good neighbour rather than the nuisance. Hydrogen Sulphide can pose serious health and safety concerns to plant personnel as well as the general public. A mere 10 parts per million can cause eye and throat irritation while levels >500 parts per million can be fatal. The MPOX range of products eliminates Hydrogen Sulphide and the dangers it presents.
H2s Removal and The Solution – Do It Now!
GPC Clear Solutions recommend Mpox a hydrogen sulphide scavenger for the removal of Hydrogen Sulphide ( H2S ) meaning it eliminates H2S particles at source leaving no trace of odour.
Eliminate the danger and nuisance of Hydrogen Sulphide with the MuSol MPOX range of products…
- MPOX 50 > Will remove odours from treatment buildings
- MPOX Active > Will remove odours from collection systems and sewer networks
- MPOX SX > Will remove odours during cake transportation and storage
- MPOX TR> Will remove odours during the importing and exporting of raw sludges
Musol MNA 4 is typically pre-diluted and atomised into a fine mist using a misting unit. Musol MNA 4 combats odours in 5 different ways…
Ref: H2S Removal