Sludge Dewatering

Sludge dewatering is the process of removing water from the sludge i.e. generated by DAF or clarification. The sludge produced from a DAF or clarifier will often still contain a large amount of water, this means that significant amount of storage area your sludge holding tank is now full of water that could go to sewer. This water along with the sludge is typically pumped away from the site in tankers at significant cost to your business. GPC’s high molecular weight flocculants in conjunction with a screw press can greatly increase the efficiency of the treatment process, often eliminating the need for tankers saving your business thousands of pounds a year as well as reducing your carbon footprint!* The use of an organic primary coagulant in conjunction with a flocculent can greatly enhance the results given on a belt press or plate and frame press. Sludge dewatering is effective for recycling water and the process will also reduce disposal costs. Key Benefits Reducing your carbon footprint. You can reduce your carbon footprint with sludge dewatering. Transport accounts...
Read More

Foam Control

GPC Clear Solutions Limited can offer a complete range of anti-foam products together with a unique foam control system. Foam can cause many problems within a process. It can cause slip hazards by overflowing onto the floor. It can block filters, cause pumps to air lock and confuse instruments such as level sensors. GPC Clear Solutions Limited can provide a complete range of anti-foam products that will deal with foam in any industrial application. A common problem with foam is that it can be unpredictable. This often means overdosing with anti-foam products “To Multi-sense Probebe on the safe side”. GPC Clear Solutions Limited can provide a completely automatic anti-foam dosing system. This unique system detects the level of foam in a vessel and will only dose anti-foam when it is needed. The sensor is designed to discriminate between the residual deposits of foam that build up on the sensor itself and the foam being created in the process. No matter how much the...
Read More
Smell Eggs At Work? Could be H2S. H2S Removal Experts GPC.

Smell Eggs At Work? Could be H2S. H2S Removal Experts GPC.

H2S Removal – Problem and Solutions Hydrogen Sulphide also is known as H2S and is a colourless gas that produces a foul-smelling odour similar to rotten eggs, It is extremely poisonous, corrosive and flammable. Hydrogen Sulphide results from the microbial breakdown of organic matter this can include human and animal waste, sludge storage tanks, sewers and associated pipelines. H2S is heavier than air and can often fill a building from the ground up. The mixture of H2S air is explosive and burns with a blue flame. Consequences of Corrosion Hydrogen Sulphide forms acidic gases that are very corrosive to most metals. Copper is particularly susceptible to attack resulting in damage to costly electronics and electrical components. Hydrogen Sulphide, when combined with water vapour, leads to the creation of Sulphuric Acid that attacks concrete in sewer lines causing severe degradation that can lead to sewer collapse and rapid system failure. Symptoms of H2S Poisoning H2S irritates the mucous membranes of the body of the respiratory tract, following short term exposure to low PPM...
Read More